HI everyone!
A common question many diamond shoppers have is about "certificates"
If a diamond is "certified" that's a good thing, right?
Today many people -certainly the readers of this forum- are aware that GIA is the best lab.
Still, we find a lot of shoppers who want to "game the system": by buying a "discounted" stone with an EGL report.
Say a diamond graded J/SI1 by GIA is $10,000.
A diamond of similar size and shape graded J/SI1 by EGL might be $7500.
How about an EGL graded H/VS2 for $10,000.
Is that better than the GIA J/SI1?
I mean, who wouldn't rather have a VS than an SI?
The problem is, there's no consistency in how far off the EGL report might be.
To demonstrate this, I'm going to use a stone we were offered by one of our cutters.

I love the stone. it's one of those super charming light browns that is almost "peachy" sometimes.
What did EGL grade this stone?
I color, SI1 clarity.What is the actual color and clarity of the stone?
Well, at this point, since there is no GIA report, I will need to grade the stone.
I see the stone as an L ( or M) color, I1 clarity.
Let's have a look at the diamond face down on a piece of paper.
From this perspective, the Brown is easy to see.

Clarity: I think it's a great I1- nonetheless, there's enough imperfection to surpass an SI2 IMO
In the shot below you can see the feather at about 2:00
and a second feather at about 7:00.
Then a faint crystal, located pretty much dead center.

If the stone had no other imperfection, I believe GIA would grade the crystal, on it's own, to be a VS2.
Each of the feathers - judged on it's own- would likely get SI2 from GIA.
Put all three together and it's going to get I1 from GIA.
This is a great example of how clarity grading is cumulative.
You might see an I1 that only has one imperfection- but a large one.
In this case there's a greater number of less serious inclusions. The result is a stone which is pretty much eye clean.
But that's really no excuse for grading the diamond SI1!
It's important to note that the EGL that issued this grade is, I believe, a non USA EGL, which are acknowledged to be the worst. Of course once we're allowing for non GIA "certificates", it's a long slippery slope.
The bottom line: Since the diamond sells $26,950 the lack of GIA is not a concern to me, as a wholesale level buyer.
A legit I/SI1 4 carat is going to cost close to $50k
To me, the lack of GIA makes little difference- but I know who cut the stone- and that I can trust them.
To a buyer it makes a huge difference.
Say the stone was represented as an I/SI1.
After all, it's certified, right?
Then one seller is charging $27k for a stone which is -ostensibly- the same grade as the $47K diamond.
To me, the willingness to advertise a stone like this as an I/SI1 indicates a lack of either knowledge of diamonds, or integrity.
Of course it goes on every day.